Showing posts with label Jalopies. Show all posts
Showing posts with label Jalopies. Show all posts

Monday, August 24, 2009

Be vewy quiet, I'm hauling wabbit


I finally got around to hauling the Rabbit up to Maine for Jon to do some work on. It has been in Lee's barn for about 4 years now. In that that time it grew some mold on the interior and provided sanctuary for countless mice. Overall I think that is it very salvageable. Jon will put it on the lift and determine whether or not I am right. I didn't get a chance to try and start the bunny. Instead I scrubbed the mold off of the interior and vacuumed the mice nests out of the engine compartment and glove box. The battery was too far gone to even take a charge and I didn't have time to check the airbox to see if the mice had taken up residence in there as well. Jon will just have to do me the huge favor of doing that for me if he decides that it is worth the hassle.


I neglected to take pictures of the mouse nests, but below is a picture of the mold growing on the driver's side door panel.



I also didn't take pictures of the interior after I washed it, but it cleaned up pretty well. I used a mixture of water, bleach and dishwashing liquid. I wore a respirator while doing this too lessen the likelyhood of getting a respiratory infection. Hopefully it was worth the trouble. I'll post Jon's diagnosis as we go.

Wednesday, February 22, 2006

Hello Toyota Tacoma


OK, I haven't gotten the Tacoma yet so I hope I'm not jumping the gun just yet, but I'm excited. I grabbed some pics off of the dealer's site so everyone can see what it looks like. Pretty sweet, eh? It has BF Goodridge All Terrain TA/KO's on it and everything. Those are just the tires that I'd put on if I were't so cheap. My best friend Jon and I went many places we never thought possible atop four BFG's, ignoring the fact that those were considerably bigger and being powered by a Chevy V-8, and I can't wait to see where these can take me. Most likely just to work and back several hundred times, but nonetheless, they look pretty badass don't they? Yeah, I thought so too.

Tuesday, February 21, 2006

Bye Bye Golf Diesel



I've finally given up on the Golf. Putting aside the fact that there are good sized rust holes in the body and that the driver's door handle is a speaker cable, the fact that parts mounted to the engine are beginning to shake themselves loose is enough for me to call it quits. I've decided that since I no longer live in a bad neighborhood, like Wooster St. in New Haven, I can have a decent vehicle again and not worry too much about it being broken into every other month or so. My friend/coworker Lee is now the proud owner of the '86 VW Golf Diesel. He'll be posting any changes to the Golf here: http://nodeep6-86.blogspot.com/. I will be replacing the Golf with a 2000 Toyota Tacoma 4WD pickup(The sale willl be final on 2/23/06), which I put a deposit on last night. Hopefully the Tacoma will be a tool in my DIY projects rather than becoming another project itself. I'll post some pics of it as soon as I can.

Monday, February 06, 2006

DIY - Practically free fix for broken car door handle


Do you own an older car on which the outer door handles are difficult to use or don't work at all? If so, I have the fix for you. My '86 VW Golf's driver’s door handle broke one morning as I was attempting to go to work. It has the old VW trigger style door handles that have a reputation for failing over time. Call me cheap or whatever you'd like, but since I paid $800 for this car I'm certainly not going to pay the ridiculous prices charged for a replacement door handle. Instead I chose to put my inventive mind to work and created a fix that cost me nothing but a bit of embarrassment when people see it. Knowing that I had some speaker cable that once went to the stereo on the CJ (the stereo had been stolen a year or so before I bought the Jeep) in the garage, I figured that I could finally find a good use for it. I tied one end to the grab handle on the inside of the driver’s door, and the other to the interior and still operational door handle. Now when I get out of the car I simply hold on to the wire loop and shut it in the door. To get in I jut pull on the loop. Problem solved and it didn’t cost me a penny.

Wednesday, January 25, 2006

Jeep Ramble

I’m starting to get antsy to do some work to the Jeep. The oil that covers the underside is a big problem though. I need to get rid of that oil and grease before I can weld in some floor panels. I’d really prefer not to burn down the house that Lisa just bought in June. I’m not sure how I can wash the damn thing in this cold weather though. I guess I could drive it to a carwash but there is no top on it and holes in the floor so I need to wait for a warm day or I’ll freeze to death in the process. Weekends lately are spent looking at reception halls or visiting friends, leaving little opportunity to utilize the rare warm day in a New England winter. If only the days were longer so I could have just a little more time to work on the heap. I guess that I just have to keep a look out for a warm day and jump on the opportunity when it arises.

Monday, January 23, 2006

Project: Biodiesel Processor; Post #1

My coworker Lee and I decided about a year ago that we both wanted to make a biodiesel processor. For those of you not familiar with biodiesel I'll give you a summary: Biodiesel is a fuel that is derived from vegetable or animal oil, which can be run in any diesel engine. Basically you take veggie oil, add some lye and methanol; heat it up and mix it well, and voila! you have biodiesel. A majority of the plans that we've found on the internet have recommended using a water heater as a reactor vessel, due to the fact that they are well insulated, have a thermostat controlled heat source, and can be found in working order for free. Lee and I happened to stumble onto just such a water heater on our way back from Wendy's one lunchbreak, so we tossed it in my Golf and headed back to work. We then proceeded to hook up a pump and rewire it to eliminate the top heating element because it would not be submerged in the oil at all times and is therefore a fire hazard. Anyway, as you may be able to tell from the picture, it isn't quite finished and it has been sitting like that for several months now. Eventually we hope to finish it up and find a restaurant that would be willing to donate some greasy goodness for us to run in our beaten up diesel VW's. This project is currently on hold. There are too many others that need to be completed first. I think that the CJ gets top priority, because I've expected the Golf to die for more than a year now and I need to free up garage space to fix up the Golf's replacement, a 1981 VW Diesel Rabbit Pickup. Somewhere in between these projects I hope to turn a three-season porch into a year-round sunroom, get married to my nearly perfect fiance, and try to keep our new house from falling apart around us. It should be a pretty exciting time.

Project, Codename: CJ; Post #:1

The first project that I'll post here is my 1982 Jeep CJ-7. For those of you not familiar with the CJ-7 it is Jeep's predecessor to the Wrangler. The CJ is a great vehicle - especially if you are handy with a wrench. The first thing you need to know about CJ's is that they leak fluids... always. You can replace every seal and gasket in the vehicle, but there will be something that will start leaking as soon as you finish. Jeep enthusiasts typically say that their CJ is simply, "marking its territory". If that is true, my CJ has claimed a large part of New England as its territory, so all other cars beware. Even with the many leaks that plague my CJ, rust is the biggest problem that I face in keeping this bad boy safe and road worthy. My friend Jon owned the CJ before me, and installed a carpet to make the CJ seem a little more civilized than it did with the interior being the same metallic brown as the rest of the Jeep. The only problem with the carpet is that it prevented water that entered the Jeep via the missing or nonfunctional door gaskets from escaping. This caused the floors underneath the carpets to be constantly exposed to water, thus turning them to that lovely compound that car enthusiasts like me dread so much; iron oxide. I despise rust so much. My poor VW beetle was plagued by it as well, and someday I will do a frame-off restoration of that, but right now the Jeep takes first priority. I'm not sure whether or not I will be able to do anything resembling a frame-off resto of the Jeep, but I absolutely have to take measures to remedy the rusty areas in the floors and prevent rust from eating any more of my poor CJ. Pictures of the rust can be seen on my flickr site by clicking the title of this post.